It takes just minutes to change the blade of a Skil reciprocatingsaw.
This guide will help you remove and replace the blade. You will also find some tips to maximize the use of your reciprocating saw.
How To Change A Blade On A Skil Reciprocating Saw? Step By Step Guide
Tools:
Step 1 :
Place the saw on a flat surface, with the blade down, to make it easy to reach.
Step 2
You can change blades by removing the blade clamp and grabbing the new blade. Once it is in place, push the new blade into the slot until it locks. To retract the blade, just press the trigger on the saw.
Step 3 :
Now you are ready to start cutting. To ensure the blade is properly installed and sharpened for your application, you should first make a few tests cuts with scrap material. You should get crisp, clean cuts with a new blade.
Features
- Powerful 5.0 A motor gives you more power to cut through wood and other materials, even with nails.
- 7-1/4 in. The stroke length is 33% shorter than the competition.
- Variable speed allows users to adjust the stroke speed to suit the application (from 0.2-0.600 SPM).
- An LED work light illuminates dark surfaces
- To minimize downtime and accidents potential, electric brakes stop blade rotation quickly and completely.
- Packages: SKU 204.1707 and 204.1709 respectively. * Compare to 4in. competitive saws. stroke length.
How Do You Remove An Old Blade?
Step 1 :
You can remove the blade by releasing the securing clamp and pulling the blade out.
Step 2
After you have done that, place your new blade and attach it to the clamp. To ensure stability, you will need to hold the lower portion of the clamp in place while tightening it.
Step 3
After your blade is secured, insert the new one to verify that it fits properly. Repeat the process until you are satisfied with the results.
Step 4 :
Insert the blade into the clamp by pushing down on the end and pulling the trigger. Once the blade is fully in place, it will stay there.
Step 5
After you are done, reconnect the power supply and get ready to cut!
How Do You Install A New Blade?
On the blade nearest to you, unscrew the Allen screws from the blade clamp. As you remove the existing blade, make sure you keep the lower end of the blade clamp in place. Push the blade into place. Secure clamp by replacing Allen screws
Make sure you replace the blade as soon as it gets dull. These blades are available at most hardware stores, home improvement centers, and online. Certain higher-end saws have a quick-change system which allows you to remove and install your blades without the need for tools. Refer to your owner’s manual for more information.
A dull blade can lead to kickbacks that could ruin your cut or cause personal injury. When operating any saw, or any other type of saw, always wear the appropriate safety gear!
Tips To Avoid Injury When Changing Blades
To protect your hands against sharp blades and other flying debris, always wear heavy-duty gloves.
As the blade can vibrate during use, make sure you don’t get your arms in the way of it. As you insert the blade into its holder, keep your body still on both your feet. Failing to properly set up your new reciprocating tool for use can cause injury or damage.
Which Situations Are Suitable For A Reciprocating Saw In
This type of saw is ideal for any project that requires straight cuts in metal, wood, or drywall.
These tools are great for home and business renovations and remodels. These tools are also helpful for carpenters that need to remove old cabinets, counters, or flooring.
Safety Tips
If these tools are not used correctly, they can be very dangerous. These safety tips are important to remember when working with these tools:
You are using a powerful tool, so you need to know how it works. Even when doing small details, always use both hands. To prevent debris from entering your mouth, keep it closed. To protect your eyes, always wear safety glasses. Before you use safety goggles, be sure to read all warning labels. The best eyeglasses are the DEWALT DPG82-11C.
When cutting through masonry, you must be aware of the direction your blade is traveling while it spins. You should keep your workspace clear of pets and people that could get in the way of the blade. If the blade is having trouble cutting, don’t force it. It can become loose and fly off its axis, which could cause injury.
Conclusion:
This post should have helped you understand how to change the blade on a skill reciprocating. Safety should always be your number one priority when you use power tools. Before starting any project, we recommend that you carefully read the instructions from the manufacturer.
